- 5-day instructor-led training course
- Authorized Cisco Training Provider
Authorized Cisco CCSI instructor
- Providing over 20 years of Cisco training
- Attend virtuallly from your home or office
#1870
ENARSI Implementing Cisco Enterprise Advanced Routing and Services Training
Course 1870
- Duration: 5 days
- Language: English
- Level: Intermediate
The ENARSI Implementing Cisco Enterprise Advanced Routing course gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0 course.
This course helps prepare you to take the exam, 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI), which leads to the CCNP® Enterprise and Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certifications. This course also earns you 40 Continuing Education (CE) credits towards recertification.
Cisco Enterprise Advanced Routing Training Delivery Methods
In-Person
Online
ENARSI Implementing Cisco Enterprise Advanced Routing Training Information
In this course, you will learn how to:
- Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6.
- Optimize classic EIGRP and named EIGRP for IPv4 and IPv6.
- Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6.
- Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments.
- Optimize OSPFv2 and OSPFv3 behavior.
- Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6.
- Implement route redistribution using filtering mechanisms.
- Troubleshoot redistribution.
- Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA).
- Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments.
- Optimize MP-BGP in IPv4 and IPv6 environments.
- Troubleshoot MP-BGP for IPv4 and IPv6.
- Describe the features of Multiprotocol Label Switching (MPLS).
- Describe the major architectural components of an MPLS VPN.
- Identify the routing and packet forwarding functionalities for MPLS VPNs.
- Explain how packets are forwarded in an MPLS VPN environment.
- Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs).
- Implement Dynamic Host Configuration Protocol (DHCP).
- Describe the tools available to secure the IPV6 first hop.
- Troubleshoot Cisco router security features.
- Troubleshoot infrastructure security and services.
Training Prerequisites
Before taking this course, you should have:
- General understanding of network fundamentals
- Basic knowledge of how to implement LANs
- General understanding of how to manage network devices
- General understanding of how to secure network devices
- Basic knowledge of network automation
These Cisco courses are recommended to help you meet these prerequisites:
- Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
- Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
- Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0
Certification Information
This course will help you prepare for the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam. This exam tests your knowledge of implementation and troubleshooting for advanced routing technologies and services.
After you pass 300-410 ENARSI:
- You earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification.
- You satisfy the concentration requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, pass the Enterprise core exam, 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR).
ENARSI Implementing Cisco Enterprise Advanced Routing Training Outline
- Implementing EIGRP
- Optimizing EIGRP
- Troubleshooting EIGRP
- Implementing OSPF
- Optimizing OSPF
- Troubleshooting OSPF
- Configuring Redistribution
- Troubleshooting Redistribution
- Implementing Path Control
- Implementing Internal Border Gateway Protocol (IBGP)
- Optimizing BGP
- Implementing MP-BGP
- Troubleshooting BGP
- Exploring MPLS
- Introducing MPLS L3 VPN Architecture
- Introducing MPLS L3 VPN Routing
- Configuring Virtual Routing and Forwarding (VRF)-Lite
- Implementing DMVPN
- Implementing DHCP
- Introducing IPv6 First Hop Security
- Securing Cisco Routers
- Troubleshooting Infrastructure Security and Services
- Troubleshooting with DNA Center Assurance
- Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
- Verify the EIGRP Topology Table
- Configure EIGRP Stub Routing, Summarization, and Default Routing
- Configure EIGRP Load Balancing and Authentication
- Troubleshoot EIGRP Issues
- Configure OSPFv3 for IPv4 and IPv6
- Verify the Link-State Database
- Configure OSPF Stub Areas and Summarization
- Configure OSPF Authentication
- Troubleshoot OSPF Issues
- Implement Routing Protocol Redistribution
- Manipulate Redistribution
- Manipulate Redistribution Using Route Maps
- Troubleshoot Redistribution Issues
- Implement PBR
- Configure IBGP and External Border Gateway Protocol (EBGP)
- Implement BGP Path Selection
- Configure BGP Advanced Features
- Configure BGP Route Reflectors
- Configure MP-BGP for IPv4 and IPv6
- Troubleshoot BGP Issues
- Configure Routing with VRF-Lite
- Implement Cisco IOS DMVPN
- Obtain IPv6 Addresses Dynamically
- Troubleshoot DHCPv4 and DHCPv6 Issues
- Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
- Configure and Verify Unicast Reverse Path Forwarding (uRPF)
- Troubleshoot Network Management Protocol Issues: Lab 1
- Troubleshoot Network Management Protocol Issues: Lab 2
Questions about this course?
Customize Your Team Training Experience
Fill out the form below or call 888-843-8733
Need Help Finding The Right Training Solution?
Our training advisors are here for you.
Cisco Enterprise Advanced Routing Training FAQs
- Gain the knowledge you need to install, configure, operate, and troubleshoot an enterprise network
- Qualify for professional-level job roles in advance routing and services
- Enterprise network engineers
- System engineers
- System administrators
- Network administrators
The ENARSI course is a 5-day instructor-led training course that provides knowledge on how to install, configure, operate, and troubleshoot an enterprise network. It covers advanced routing and infrastructure technologies, building on the topics covered in the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course.
The course is provided by an Authorized Cisco Training Provider and an Authorized Cisco CCSI instructor with over 20 years of Cisco training experience.
The course is offered in both in-person and online formats, and can also be delivered to your organization through team training.
The course covers topics such as configuring and troubleshooting classic Enhanced Interior Gateway Routing Protocol (EIGRP) and Open Shortest Path First (OSPF), implementing route redistribution and path control, configuring and troubleshooting Multiprotocol-Border Gateway Protocol (MP-BGP) and Multiprotocol Label Switching (MPLS), implementing Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs), and troubleshooting Cisco router security features and infrastructure security and services.
Before taking this course, you should have a general understanding of network fundamentals, basic knowledge of how to implement LANs, general understanding of how to manage network devices, general understanding of how to secure network devices, and basic knowledge of network automation.
It is recommended to take the Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0, Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0, and Interconnecting Cisco Networking Devices, Part 2 (ICND2) v3.0 courses to meet these prerequisites.
By passing the Implementing Cisco Enterprise Advanced Routing and Services (300-410 ENARSI) exam, you will earn the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification and satisfy the concentration requirement for the new CCNP Enterprise certification.
To complete your CCNP Enterprise certification, you will need to pass the Enterprise core exam, 350-401 Implementing Cisco Enterprise Network Core Technologies. The course also earns 40 Continuing Education (CE) credits towards recertification.